Static baking chamber for 2-tray 40x60 cm.
- Electric heated
- Totally independent
» Refractory baking stones plate made of fibreglass
» High-performance armoured heating elements
» Digital electronic microprocessor controller
» Programmable switch and economizer
» Manual valve for steam excess exhaust
» Stainless steel front
» Tempered glass doors
This product is no longer in stock
The main characteristic of the Modular ovens is the possibility to configure their structure according to customer’s needs.
To this end you can choose:
- quantity of baking chambers (from 1 to 4)
- usable internal height of the chambers (18 or 23 cm)
- lower support’s height (66 or 75cm)
- type of support feet (h.18 feet, h.10 feet, wheel or plate)
- if necessary, you can motorize the hood by installing an extractor fan
- if necessary, chambers can be equipped with a humidification system
The dimensional (height, weight, etc.) and the technical data (consumption, installed power) must be calculated by adding the data of several installed components.
When configuring the oven, keep in mind that:
- if you want to install the humidifier, it is necessary to provide also install a lower support (proofer)
- it is always necessary to install a type of support feet in order to level the oven in case of floor imperfections
- chambers panelling and proofer coating must be made of the same material